Configure two projector system

Your projector questions can be answered here.

Postby den » Mon Jul 21, 2014 1:01 am

HelIo.I have 2 projector system Infitek and want to buy your program. I downloaded the trial version. I curved screen and I need to light of different projector image (right left eye). I ran your program for two projectors, and pressed the button configuration, but the grid is displayed on only one projector. How do I configure your program to correct geometric distortion on two projectors?Thanks.
den
 
Posts: 4
Joined: Sat Oct 06, 2012 8:20 pm

Postby BHawthorne » Tue Jul 22, 2014 1:24 am

Greetings,

To better understand your configuration, you are attempting to do stereoscopic 3D by using two projectors shooting onto a standard 16:8 screen? Is this a passive polarized screen setup?

-Brad
User avatar
BHawthorne
 
Posts: 1300
Joined: Thu Sep 20, 2012 11:02 pm

Postby den » Tue Jul 22, 2014 9:38 pm

Its 2 projector system Infitec with not polarized screen.
den
 
Posts: 4
Joined: Sat Oct 06, 2012 8:20 pm

Postby den » Thu Jul 24, 2014 8:11 pm

Two years ago we used this configuration with nthusim, and system was work. When nthusim not not dispkayed grid on second projector? Thanks.
den
 
Posts: 4
Joined: Sat Oct 06, 2012 8:20 pm

Postby BHawthorne » Fri Jul 25, 2014 2:59 am

Nthusim has always required a spanning mode -- Matrox GXM box, AMD Eyefinity or Nvidia Surround. Has the hardware you used to run it on significantly changed in configuration? Which version of Nthusim was used previously?
User avatar
BHawthorne
 
Posts: 1300
Joined: Thu Sep 20, 2012 11:02 pm

Postby den » Fri Jul 25, 2014 9:14 pm

We use Radeon 7870, three years ago we used Radeon 6870.
den
 
Posts: 4
Joined: Sat Oct 06, 2012 8:20 pm

Postby BHawthorne » Sat Jul 26, 2014 1:59 am

Ah, that helps diagnose it a bit. AMD cards use Eyefinity for the spanning mode. You would enable an Eyefinity 2x1 span to get Nthusim to work across both projectors.

-Brad
User avatar
BHawthorne
 
Posts: 1300
Joined: Thu Sep 20, 2012 11:02 pm


Return to NTHUSIM Standard & Plus -- Projectors

cron