Hello everyone!
Finally getting to the point where I get to play around with Nthusim for real!
We've got a FSX Simpit that uses 3 projectors. Traditionally, I've used a Matrox TH2G Digital box in conjunction with Nthusim and it has (and still does) work. Just recently we decided to upgrade our main Sim computer to a desktop with a better GPU. What I'd like to do now is to remove the TH2G and directly connect all the projectors straight into the graphics card.
Normally, the configuration utility spans all three of the TH2G views and I'm able to calibrate things, but using the new configuration I've just described yields the configuration grid only on one of the projectors. I have a feeling I'm doing something wrong... Can anyone shed some light on this?
Thank you!!
Warping projectors directly connected to GPU
6 posts
• Page 1 of 1
by BHawthorne » Mon Jul 14, 2014 10:23 pm
Greetings,
What is the brand and model of the new graphics card? AMD and Nvidia have different methods for enabling their spanning modes. Both are achieved through their control panel though. AMD's spanning mode is called Eyefinity, while Nvidia's is called Surround. Once I know which video card you have I should be able to give you a quick answer.
-Brad
What is the brand and model of the new graphics card? AMD and Nvidia have different methods for enabling their spanning modes. Both are achieved through their control panel though. AMD's spanning mode is called Eyefinity, while Nvidia's is called Surround. Once I know which video card you have I should be able to give you a quick answer.
-Brad
-
BHawthorne - Posts: 1300
- Joined: Thu Sep 20, 2012 11:02 pm
by Guest » Mon Jul 14, 2014 10:30 pm
Ahh okay. So I've been wondering what Eyefinity was I'm using an Nvidia GeForce GTX 780.
I'm using an Nvidia GeForce GTX 780.- Guest
by BHawthorne » Tue Jul 15, 2014 12:15 am
-
BHawthorne - Posts: 1300
- Joined: Thu Sep 20, 2012 11:02 pm
by 1miracle2 » Sat Jul 19, 2014 8:58 am
I'm assuming this did but did this help you get taken care of?
Daniel Araiza
9' x 4' self built immersive screen
1 Optoma projector
(2nd on hold actually, may need to just upgrade that optoma to a 1080P, dang, could have saved $ and got the single projector set up)
9' x 4' self built immersive screen
1 Optoma projector
(2nd on hold actually, may need to just upgrade that optoma to a 1080P, dang, could have saved $ and got the single projector set up)
- 1miracle2
- Posts: 40
- Joined: Wed Jun 11, 2014 11:01 am
by BHawthorne » Tue Jul 22, 2014 1:25 am
Just checking in to see if there is any update. Let me know if you stil need help. Thanks,
-Brad
-Brad
-
BHawthorne - Posts: 1300
- Joined: Thu Sep 20, 2012 11:02 pm
6 posts
• Page 1 of 1