Hi,
I am currently building a dual projector Racing simulator and was wondering if there is a maximum amount of overlap that the software can handle?
The spec of the system are as follows:
180 deg 1.187m radius Screen
2 x Dell S300W Projectors running through a Matrox Dualhead2Go.
I am after a 1.7m height of image as the driver will be sat in a standalone mockup of a touring car. Going on the calculation from Projector Central, that would put my screen width at 2.72m. Going on that size I would have an overlap of nearly 1m.
Is that amount of overlap acceptable
Thanks
Rob