Secondary screen

Your projector questions can be answered here.

Postby muzza » Wed Oct 09, 2013 5:48 pm

I have just swapped over to ver3.3 and see improvement on my projeced output but what I do have now with 3.3 is that my Secondary screen used for GPS hardware has a dark like mask over its picture when in Full View mode.
It darkens the dispay where its almost unreadable. I dont want to increase brightness as it will shorten the screens life..
It was fine in the previous version I had. Any thoughts?
I have checked Tools and clicked Crop Window etc and only comes good if I put it back to Window mode!!!
muzza
 
Posts: 4
Joined: Sat Oct 27, 2012 4:59 pm

Postby muzza » Wed Oct 09, 2013 9:36 pm

Since this problem I have updated the GFX card driver to the latest version but another question is when I go to Full View in FSX my frame rate drops by half from Window mode.
Is this normal as I didn't think this was?
Any help on this would be great.
muzza
 
Posts: 4
Joined: Sat Oct 27, 2012 4:59 pm

Postby BHawthorne » Thu Oct 10, 2013 1:20 am

Odd, that is abnormal. Do you happen to have FPS limiter settings inadvertently set in the Tools menu?
User avatar
BHawthorne
 
Posts: 1300
Joined: Thu Sep 20, 2012 11:02 pm


Return to NTHUSIM Standard & Plus -- Projectors

cron