Blending

Have questions about purchase or activation of NTHUSIM?

Postby kevinlm » Mon Oct 09, 2017 5:38 am

Hi Brad
What is the most effective width for the projector blending overlap for 3 projector setup on a curved screen ,
Expressed as a percentage
Please advise....thanks in advance
Kevin
kevinlm
 
Posts: 3
Joined: Fri Jun 10, 2016 9:22 am

Postby BHawthorne » Mon Oct 09, 2017 5:42 am

I believe it's 15% -- 7.5% per side. I'm going by memory because we did the design spec on this back in 2010. I prefer to go past that so I can also do a hardware blend using electrical tape on the projection lens also to get rid of the projection hard break in the black levels.I prefer doing both a software edge blend and a hardware edge blend, so there are minimal issues with the blend area.
User avatar
BHawthorne
 
Posts: 1300
Joined: Thu Sep 20, 2012 11:02 pm


Return to Purchase, Activation & Account Support

cron